6.4

The Importance of Controls

Time to take control

Mitsubishi Electric technology

Operating an air conditioning, ventilation or heating system

Mitsubishi Electric has been dedicated to producing energy efficient

without effective controls can be costly in more ways than

technology for over ninety years. Controls are an essential part of

one. Not only are you likely to face higher monthly energy

that. Mitsubishi Electric has long heritage in factory automation

bills, it will also lead to an increase in carbon emissions

where the company leads the field in providing controls that

- something that will become ever more important

enhance productivity, efficiency and energy use.

as businesses strive to keep up with tougher

We have taken this extensive knowledge and experience and transferred it to the heart of

environmental legislation.

our building services equipment.

The right controls take building performance to the next level. With them,

We were also one of the first manufactures to provide an open gateway to our products to

building systems become more responsive, easier to automate, monitor

make integration easier for our customers. This enables direct connection of equipment into

and maintain, and less costly to operate in the long-term.

many common building energy management system (BEMS) platforms.

The right controls can deliver a cost-effective solution that helps manage,

Recently, Mitsubishi Electric has developed Internet-based building controls that put

monitor and report on the performance of all building

information on building performance wherever users need it most and wireless

services systems.

technology that makes retro-fitting into existing buildings so much easier.

Control technology is now widely

From a simple hand-held controller to a centralised BEMS,

available for buildings of all sizes,

Mitsubishi Electric puts its customers in control.

so it is possible to access the

benefits whatever the scale or

scope of your project.

The European Standard EN 15232

“Energy Performance of Buildings -

BS EN 15232: Function list and assignment to energy performance classes

Impact of Building Automation,

Heating / Cooling Control

Ventilation / Air Conditioning Control

Lighting

Sun Protection

Controls and Building Management”

Demand or presence dependent

Automatic daylight control

Combined light /

was compiled in conjunction with the

A Individual room control with

communication between controllers

air flow control at room level

Automatic occupancy detection

blind / HVAC control

Indoor temperature control of

Variable set point with load

manual on / auto off

Europe-wide implementation of the

distribution network water temperature

dependant compensation of

Automatic occupancy detection

Total interlock between heating

supply temperature control

manual on / dimmed

directive for energy efficiency in

and cooling control

Room or exhaust or supply

Automatic occupancy detection

air humidity control

auto on / auto off

buildings (Energy Performance of

Automatic occupancy detection

auto on / dimmed

Buildings Directive EPBD) 2002/91/EG.

Time dependent air flow control

Manual daylight control

Motorised operation

B Individual room control with

communication between controllers

at room level

Automatic occupancy detection

with automatic

Indoor temperature control of

Variable set point with outdoor

manual on / auto off

blind control

The Standard describes methods for evaluating

distribution network water temperature

temperature compensation of

Automatic occupancy detection

the influence of building automation and technical

Partial interlock between heating

supply temperature control

manual on / dimmed

and cooling control (dependent

Room or exhaust or supply

Automatic occupancy detection

building management on the energy consumption

on HVAC system)

air humidity control

auto on / auto off

Automatic occupancy detection

of buildings.

auto on / dimmed

Time dependent air flow control

Manual daylight control

Motorised operation

Four efficiency classes A to D have been

C communication between co

ntrollers

at room level

Manual on / off switch + additional

with manual

introduced to this purpose. After a building

Indoor temperature control of

Constant set point of supply

sweeping extinction signal

blind control

distribution network water temperature

temperature control

Manual on / off switch

has been equipped with building automation

Partial interlock between heating

Supply air humidity limitation

and cooling control (dependent

and control systems, it will be assigned one of

on HVAC system)

these classes. The potential savings for thermal

No air flow control at room level

Manual daylight control

Manual operation

and electrical energy can be calculated for each

D No automatic control

No control of distribution

No supply temperature control

Manual on/off switch + additional

for blinds

network water temperature

No air humidity control

sweeping extinction signal

class based on the building type and building

No interlock between heating

Manual on/off switch

purpose. The values of the energy class C

and cooling control

are used as the reference for comparing

Section from table 1 of the BSEN 15232:2007 [D]

the efficiency.

Building Automation and Control (BAC) efficiency classes to EN 15232

Efficiency factor for thermal energy

Efficiency factor for electrical energy

The diagram on the right, shows the differences

Office

School

Hotel

Office

School

Hotel

in energy consumption for three building types

High energy performance building automation and control system (BACS)

0.70

0.80

0.68

0.87

0.86

0.90

in the energy efficiency classes A, B and D

and technical building management (TBM)

relative to the basis values in rating C. For

Advanced BACS and TBM

0.80

0.88

0.85

0.93

0.95

example, by using class A, 30 % of the

Standard BACS

thermal energy can be saved in offices.

D Non energy efficient BACS

1.51

1.20

1.31

1.10

1.07

6.5

Controls

The Importance of Controls

Good controls will benefit any application. With a wide portfolio of control products,

Which Controls

it is important to select the right control solution for each application.

product for Which

application?

appliCation

siZe

typiCal produCt installed

Control solutions

Case study

City Multi VRF Systems

PAR-40MAA or AE-200E-WEB USER

Wholesaler PACAIR uses an AE-200E Centralised Controller to provide complete control of the

SMALL

Mr Slim Split-Systems

AE-200E or AT-50B

office air conditioning. The 10.4” touch screen controller and easy to use interface gives PACAIR

Mr Slim IT Room Applications

PAC-Yg66DCA or PAC-Yg60MCA

the ability to set up a weekly time schedule, as well as offering a host of energy saving features.

offIcE

Mitsubishi Electric’s Hatfield headquarters has been updated to new AE-200E/EW-50E HTML5

City Multi VRF Systems

PAR-40MAA or

controls to monitor and control all of the air conditioning equipment across 3 floors and 2 wings.

LARGE

City Multi Air Curtains

AE-200E-WEB USER

This enables the system to operate as efficiently as possible, incorporating easy to use controls

City Multi PWFY Heat Pumps

AE-200E or AT-50B

and allows for fully programmable scheduling that accommodates flexible working patterns.

The luxury 4-star Kingsmills Hotel provides a chic and contemporary venue for discerning Highlands

PAR-CT01MAA-S/PB

travellers and focuses on relaxation, revitalisation and calm. The centralised controller delivers the

SMALL

City Multi VRF Systems

efficiency and flexibility that both the hotel and its guests need, with air conditioning integrated

AE-200E

with the room key card system combined with simple to use room controllers.

HoTEL

The Premier Inn Hotel, Leicester uses the MELCOTEL™ control interface to efficiently and effectively

PAR-CT01MAA-S/PB

control air conditioning that provides heating and cooling to 135 bedrooms, the bar, restaurant and

LARGE

City Multi VRF Systems

AE-200E

back offices. A variety of control strategies were implemented and monitored and analysed,

MELCOTEL

resulting in a 30% decrease in average monthly system running costs and CO2 emissions.

Costa Coffee was one of the first to make use of the MELCORETAIL MINI to capitalise on its energy

Mr Slim Split-System

saving feature whilst ensuring that customers and staff were comfortable in the overall coffee shop

SMALL

MELCORETAIL MINI

environment. Across a year of monitoring the MELCORETAIL MINI helped achieve a 20% reduction

Mr Slim Air Curtains

in energy use, giving it a payback period of less than 2 months.

RETAIL

A pilot site for EON has demonstrated how connecting RMI to air conditioning can highlight ways

City Multi VRF Systems

RMI PACKAgE LAN/ADSL

of reducing energy or identify unnecessary use. An average saving of 30% throughout the branch

LARGE

network was made by employing RMI, providing a return on investment within 6 months.

City Multi Air Curtains

RMI PACKAgE 3g

The Castle golf course at St Andrews need a heating and cooling system that was as controllable

Mr Slim Split-System

and efficient as possible. The M2M interface controls and monitors the air conditioning to make

SMALL

MELCOBEMS MINI

sure it maximises energy saving, whilst allowing for continuous fine-tuning according to the golf

Mr Slim Air Curtains

clubs needs.

LEISURE

Mr Slim Split-System

Fitness First uses monitoring BEMS to communicate with the air conditioning using Modbus, across

Mr Slim Air Curtains

its UK network. Dedicated Modbus Interfaces offer complete monitoring and control of the system

LARGE

MELCOBEMS

and highlights the flexibility and potential for reducing running costs that our control systems have

City Multi VRF Systems

City Multi Air Curtains

when working in conjunction with third party BEMS.

A WW2 veteran has shown the way to a sustainable future with the installation of a hybrid Ecodan

air source heat pump to work alongside his existing gas boiler. The hybrid system is designed

SMALL

Ecodan

MELCloud

specifically to work in conjunction with conventional boilers and the MELCloud Wi-Fi system also

allows the heat pump to be monitored and controlled remotely

RESIDENTIAL

The renewable heating system for St Mungo's in Lewisham needs to cope with different heating

MELCloud

loads and deal effectively with regular changes in tenancy and occupied hours. It also had to offer

LARGE

Ecodan

tenants the ability to alter the temperature of their individual flats, whilst allowing the charity full

AE-200E

central control of the system.

6.7

Controls

Which Controls Product for Which Application?

6.8

With a wide portfolio of control products, many functions are available.

Which Controls

It is important to select the right control solution for each function.

product for

Which Function?

small

system siZe

large

FunCtion

notes

option 1

option 2

option 3

option 4

option 5

Remote on/off or fire alarm

PAC-SA89TA

KTR-53B

MELCORETAIL MINI

AT-50B and

AE-200E and

On/Off remote controller

PAC-YT51HAA

PAC-Yg10HA

button lock except KTR-53B

Monitor run and faults

PAC-SA88HA

MELCORETAIL MINI

AT-50B and

AE-200E / EW-50E

Relays or power supply

PAC-YT51HAA

and PAC-Yg10HA

may be required

Window interlocking

PAC-SA89TA

KTR-53B

Controller will be centrally

controlled when window

opened

Setpoint limit

PAR-40MAA

PAR-U02MEDA

AT-50B

AE-200E / EW-50E

AE-200E

Available in Heat, Cool

and Auto modes

Weekly timer

PAR-40MAA

AT-50B

AE-200E / EW-50E

AE-200E

Setpoint, On/Off can

PAR-U02MEDA

be reset

Night set back

KTR-53B

PAR-40MAA

AE-200E / EW-50E /

AE-200E

KTR-53B requires thermostat,

PAR-U02MEDA

AT-50B

time switch, 12/24v AC/DC

power supply

Energy monitoring

AE-200E / EW-50E

AE-200E and

AE-200E / EW-50E

Different options for each

Total Energy

PAC-Yg60MCA

EW-50E

PAC-Yg60MCA

choice. Meters required

Measurement

Total Energy

Energy Apportioning

Management

Load shedding

EW-50E and

AE-200E and

Energy meters required

PAC-Yg60MCA

Trend logging

EW-50E and

AE-200E

CSV data available

PAC-Yg60MCA

on a spreadsheet

Notes: The PAC-SA89TA is also known as a 3 wire adaptor and the PAC-SA88HA is also known as a 5 wire adaptor. Disclaimer: These options are for guidance only.

With a wide portfolio of control products, many functions are available.

Which Controls

It is important to select the right control solution for each function.

product for

Which Function?

small

system siZe

large

FunCtion

notes

option 1

option 2

option 3

Night mode

PAC-SA89TA

EW-50E

AE-200E

PAC-SA89TA requires a

third party timer

Ambient tracking

AE-200E and

MELCOBEMS MINI

AE-200E

Option 1 is only available

PAC-Yg63MCA

in cooling mode

Key card interlock

AE-200E

AE-200E / EW-50E,

Volt free contact for

for hotel

and

MELCOTEL2^TM and

key card normally open

PAC-SA89TA

Window sensor interlock for hotel

AE-200E

AE-200E / EW-50E,

Volt free contact for window

and

MELCOTEL2^TM and

sensor normally closed

PAC-SA89TA

2 setpoints

MELCOMMS MINI

AE-200E

For instance, 19ºC heat and

(1 for cool and 1 for heat)

23ºC cool. Fan only in between

PAR-40MAA

MELCOMMS MINI

Duty / Standby

Backup, rotate, join in and

MELCOBEMS MINI

high temperature function

A/c faults via Modbus and BAcnet

MELCOBEMS MINI

SIM card not supplied

optimised start

AE-200E

Mini BEMS

MELCOBEMS MINI

AE-200E

occupancy sensor

PAR-U02MEDA

Notes: The PAC-SA89TA is also known as a 3 wire adaptor and the PAC-SA88HA is also known as a 5 wire adaptor. Disclaimer: These options are for guidance only.

6.9

Controls

Which Controls Product for Which Function?

6.10

A wide range of centralised controllers are available to monitor and control our

Centralised

equipment efficiently. Some of our centralised controllers can also be used to

monitor and control third party equipment.

Controllers

Key Features

at-50b

ae-200e

eW-50e

5'' basic touch screen

10.4'' full function touch screen

Web based controller

Centralised controller

Monitor and control up to 50

indoor units

Monitor and control

Monitor and control up to 50 indoor

up to 50 indoor units

units (or up to 200 indoor units with

Monitor and control general equipment

EW-50Es)

Monitor and control

Energy monitoring, load shedding

general equipment

Monitor and control general equipment

Onboard HTML5 web browser

Energy monitoring, load shedding

Optional direct BACnet connection

Web based controller

Onboard HTML5 web browser

Optional direct BACnet connection

ae-200e-Web user

paC-sC51Kua

paC-sF46epa

Available as an option

M-NET power supply

M-NET transmission booster

200 user accounts per PIN CODE

No installation cost

Centralised controller required

Very simple to use

Centralised

Controllers

Technical Specification

Centralised Controllers

at-50b

ae-200e

Ks10-rFFi

paC-yg82tb

Description

5” Touch Screen Controller

10.4” Touch Screen Controller

AE-200E Interface

AE-200E Plastic Wall Mounted Box

Connect to

M-NET Network

AE-200E and EW-50E

Max Number of Units

50 and 4 Pulse Meters

Compatibility

M Series, Mr Slim,

M Series, Mr Slim, City Multi,

AE-200E

City Multi and Lossnay

Lossnay, e-series, MEHITS Chillers^*1

and Ecodan QAHV/CAHV/CRHV

Power Supply

Via PAC-SC51KUA

220-240v, 50Hz

Dimensions (mm) (WxDxH)

180 x 30 x 120

283 x 64 x 199

130 x 30 x 80

282 x 77 x 198

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Monitor

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Fault Codes



Room Temperature



Weekly Schedule



Annual Schedule



Night Set Back



Web Pages



Optimised Start



pin Codes:

Automatic Setpoint Adjustment



Load Shedding



AE-200E-ENERgY

Occupied / Unoccupied Settings Reset

Remote Monitoring with M2M



AE-200E-BACNET

Simple Energy Monitoring



AE-200E-WEB USER

Advanced Energy Monitoring



Notes: *1 MEHITS adaptor required.

AE-200E demonstration website: http://dl.mitsubishielectric.co.jp/dl/ldg/wink/wink_doc/contents/doc/acr/menu/ae200/en/

6.11

Controls

Centralised Controllers

6.12

Centralised

Controllers

Technical Specification

Centralised Controllers

eW-50e

ae-200e-Web user

paC-sC51Kua

paC-sF46epa

Description

Web Interface and AE-200E

AE-200E Web User Pin Code

M-NET Power Supply

M-NET Transmission Booster

expansion controller

Connect to

M-NET Network

AE-200E and EW-50E

M-NET Network

Max Number of Units

50 and 4 Pulse Meters

200

Compatibility

M Series, Mr Slim, City Multi,

AE-200E and EW-50E

AT-50B, EW-50E

M Series, Mr Slim

Lossnay, e-series, MEHITS Chillers^*1

and AE-200E

and City Multi

and Ecodan QAHV/CAHV/CRHV

Power Supply

220-240v, 50Hz

Dimensions (mm) (WxDxH)

172 x 92 x 253

271 x 72 x 169

360 x 59 x 340

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Monitor

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Fault Codes



Room Temperature



Weekly Schedule



Annual Schedule



Night Set Back



Web Pages



Optimised Start



pin Codes:

Automatic Setpoint Adjustment



Load Shedding



AE-200E-ENERgY

Occupied / Unoccupied Settings Reset

Remote Monitoring with M2M



AE-200E-BACNET

Simple Energy Monitoring



AE-200E-WEB USER

Advanced Energy Monitoring



Notes: *1 MEHITS adaptor required

6.16

From a simplified controller perfect for hotel applications to a full backlight

remote

touch screen controller, we have the right remote controller to choose from.

Controllers

Key Features

par-Ct01maa-sb / par-Ct01maa-pb

par-u02meda

par-40maa

Simple to use

Touch screen M-Net Controller

Most popular controller

Touch screen

Night set back, scheduling,

180 colour screen

setpoint limitation

180 colour font display

Built in occupancy/brightness sensor

0.5ºC Set Point adjustment

Backlight

Dual Set Point

Fully configurable via smartphone App

0.5ºC Set Point adjustment

Run/Standby for Mr Slim

Customisable display

Dual Set Point

Contact number under

fault condition

Ability to display customer logos

Backlight (White / Black options)

Daylight saving function

par-Fl / Fa32ma

pZ-61dr-e

pZ-43smF-e

Infrared solution

Dedicated Lossnay controller

Simplified Lossnay controller

Controller and receiver

Night set back, scheduling

Controls a maximum of 2 units

Controller able to control

Flexible night purge

more than one receiver

Backlight

par-W31maa / par-W21maa

par-Wt50r-e / par-Wr51r-e

paC-iF072b-e / paC-iF062b-e

Dedicated remote controller

Ecodan wireless controller

Ecodan controller

(see technical specification

Ecodan receiver

Backlight

on page 6.18)

Button lock

Contact number under

fault condition

Fault codes

remote

Controllers

technical specification

remote Controllers

par-Ct01maa-sb

par-Ct01maa-pb

par-u02meda

par-40maa

par-Fl32ma

par-Fa32ma

Description

Simplified Touch Screen

Touch Screen

Standard Wired

Infrared Remote

Infrared Receiver

Wired Remote Controller

Remote Controller

Controller

(Premium Finish)

Connect to

Indoor

M-NET Network

Indoor

Max Number of Units

Compatibility

Mr Slim, City Multi and

City Multi (M Series and

Mr Slim, City Multi and

M Series via MAC-397IF^*3

Mr Slim via A2M adapter) *²

M Series via MAC-397IF

or MAC-334IF

Dimensions (mm) (WxDxH)

120 x 14.1 x 65

140 x 25 x 120

120 x 14.5 x 120

157 x 18 x 57

120 x 18 x 70

Control On/Off



Mode



Setpoint



(0.5°C)



(0.5°C)



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Monitor On/Off



Mode



Setpoint



(0.5°C)



(0.5°C)



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Fault Codes



LED

Room Temperature



(0.5°C)



(0.5°C)

Backlight



Setpoint Limitation



Independent Vane Control



Contact Number under Fault Condition



Scheduling



Weekly

Night Set Back



Button Lock



Easy Maintenance with Mr Slim



Run / Standby with Mr Slim



Silent Mode with Mr Slim



Energy Saving with Mr Slim



Occupancy Sensor (PIR)



Notes: *1 Permit/Prohibit is via Centralised Controllers. = Yes, x = No, - = Not applicable. *2 M-NET Power Supply Required via PAC-SC51KUA for M Series & Mr Slim

6.17

Controls

Remote Controllers

6.18

remote

Controllers

Technical Specification

remote Controllers

pZ-61dr-e

pZ-43smF-e

par-W31maa

par-W21maa

par-Wt50r-e

par-Wr51r-e

paC-iF072b-e

paC-iF062b-e

Description

Lossnay Wired

Lossnay Simplified Wired

Standard Wired

Wireless Remote

Flow Temperature

Remote Controller

Controller Transmitter

Controller Receiver

Controller FTC6

Controller FTC5

Connect to

Indoor

e-series EACV /

PWFY, e-series EACV / EAHV

Ecodan

EAHV (1500 / 1800) and

(900), Mr Slim Air Curtains

PU(H)Z / QUHZ

PUZ / QUHZ

PUHZ / QUHZ

Ecodan QAHV

and Ecodan CAHV / CRHV

Max Number of Units

6 (depends on unit connected)

Compatibility

e-series EACV /

PWFY, e-series EACV / EAHV

Lossnay

Ecodan

EAHV (1500 / 1800) and

(900), Mr Slim Air Curtains

LgH-RVX(T)-E

VL-220CZgV-EB

PU(H)Z / QUHZ

PUZ / QUHZ

PUHZ / QUHZ

Ecodan QAHV

and Ecodan CAHV / CRHV

Dimensions (mm) (WxDxH)

120 x 19 x 120

70 x 15 x 120

120 x 19 x 120

130 x 19 x 120

140 x 18 x 75

100 x 30 x 80

120 x 19 x 120

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction

Permit/Prohibit

Filter Sign

Monitor On/Off



Mode



Setpoint



Fan Speed



Air Direction

Permit/Prohibit



Filter Sign



Fault Codes



Room Temperature



Backlight



Setpoint Limitation



Independent Vane Control

Contact Number under Fault Condition



Scheduling

Weekly

Night Set Back



Button Lock



Easy Maintenance with Mr Slim

Run / Standby with Mr Slim

Silent Mode with Mr Slim

Energy Saving with Mr Slim

Occupancy Sensor (PIR)

Notes: *1 Permit/Prohibit is via Centralised Controllers.

= Yes, x = No, - = Not applicable.

6.22

Our dedicated solution interfaces now include new sector specific products

solution

such as our RMI Interfaces.

interfaces

Key Features

melComms mini

melCotel2

Monitor and control up to 8 indoor units

Monitor and control up to 200 indoor units

Run / Standby panel

Dedicated hotel interface

Includes 2 x MELCOBEMS MINI Interfaces (A1M)

Key card and non key card integration

Automatic Setpoint adjustment

Occupied / Unoccupied Settings Reset

rmi p

aCKage lan/adsl

rmi paCKage 3g

Monitor and control up to 42 centralised controllers

(2,100 indoor units)

Reporting function on system operation and estimated

energy performance

Multi site control

Multi user login available

Site commissioning by MEU-UK Field Service included

Connection via Wi-Fi router (LAN) or customer network

Connection via 3G sim card (included)

solution

interfaces

Technical Specification

solution interFaCes

melComms mini

melCotel2

rmi package lan/adsl

rmi package 3g

Description

Run Standby Panel

AE-200E Hotel

Remote Control &

Interface and display

Monitoring Interface

Connect to

MELCOBEMS MINI

AE-200E and EW-50E

AE-200E & EW-50E

Max Number of Units

200

2,100

Compatibility

M Series and

City Multi

M Series, Mr Slim, City Multi,

Lossnay and Commercial

Mr Slim

Heating (CAHV / CRHV)

Power Supply

220-240v, 50Hz

Dimensions (mm) (WxDxH)

253 x 90 x 180

350 x 80 x 400

113 x 28 x 89

85 x 36 x 100

SMS/gPRS Capabilities

3g^*3

Ethernet Capabilities



SIM Card Provided



Inputs

 2 Digital^*4

Outputs

 1 Digital (Fault)

 2 Digital^*4

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Monitor

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Fault Codes



Room Temperature



Weekly Schedule



Annual Schedule



Night Setback



Web Pages



Optimised Start

Automatic Setpoint Adjustment



Load Shedding

Occupied / Unoccupied Settings reset



Simple Energy Monitoring

^*1

Notes: *1 The energy monitoring is estimated using the outdoor unit data. *2 Discount cannot be applied. *3 Includes 5 years SIM hosting. *4 PAC-YG66DCA required.

6.23

Controls

Solution Interfaces

simple

interfaces

Technical Specification

paC-sJ95ma-e

interFaCes

paC-sa89ta

paC-sa88Ha

paC-yt51Haa

paC-yg10Ha

paC-sJ96ma-e^*2

Description

On/Off Adaptor

Night Mode and

Run and Fault

Heat and Cool

Run and Fault

On/Off Run and

M-NET Converter

(3 wire adaptor)

Demand Control

Adaptor

Fault Adaptor

(3 wire adaptor)

(5 wire adaptor)

(9 wire adaptor)

Connect to

Indoor

Outdoor

Indoor

Outdoor

AT-50B

AE-200E and

Outdoor

EW-50E

Max Number of Units

Compatibility

Mr Slim and

City Multi

AT-50B

AE-200E and

Mr Slim Outdoor

City Multi

EW-50E

Dimensions (mm) (WxDxH)

130 x 15 x 90

Control

On/Off



Mode

Setpoint

Fan Speed

Air Direction

Permit/Prohibit

Filter Sign

Monitor

On/Off



Mode



Setpoint

Fan Speed

Air Direction

Permit/Prohibit

Filter Sign

Fault Codes



Room Temperature

Fire Alarm



On/Off but Centrally Controlled

VFC

Via 24VDC

On/Off but NOT Centrally Controlled

Run and Fault Output

12VDC

Via 24VDC

Heat and Cool Output

12VDC

Night Mode and Demand Control

VFC

Connect Mr Slim to M-NET

^{*1 *2}

Notes: VFC: Volt free contact.

*1 PAC-SJ95MA-E M-NET adaptor for PUZ-ZM60-250, PUHZ-ZRP71-250, PU(H)Z-M100-250, PUZ-SM100-140.

*2 PAC-SJ96MA-E M-NET adaptor for PUZ-ZM35-50.

= Yes, x = No, - = Not applicable.

6.27

Controls

Simple Interfaces

advanced

interfaces

technical specification

interFaCes

Ktr-53b

melCoretail mini

paC-yg60mCa

paC-yg63mCa

paC-yg66dCa

Description

On/Off and

Retail Control and

Pulse Meter

Temperature and

Third Party Control

Run/Fault Adaptor

Input / Output Interface

Interface

Humidity Interface

and Interface

Connect to

Indoor

M-NET Network

Max Number of Units

4 Pulse Meters

1 PT100, 1 Humidity Sensor

2 general Equipment

Compatibility

Mr Slim and

M Series and

AE-200E and EW-50E

City Multi

Mr Slim

Power Supply

12/24VAC/DC

24VDC

Dimensions (mm) (WxDxH)

80 x 45 x 80

85 x 32 x 138

200 x 45 x 120

Control

On/Off



VFC



Mode

0 to 10VDC

Setpoint

0 to 10VDC

Fan Speed

0 to 10VDC

Air Direction

Permit/Prohibit

VFC

Filter Sign

Monitor

On/Off



VFC



Mode

VFC

Setpoint

Fan Speed

Air Direction

Permit/Prohibit

Filter Sign

Fault Codes



VFC



Room Temperature

On/Off but Centrally Controlled

Option Lock/Unlock

VFC

On/Off but NOT Centrally Controlled

12/24VAC/DC

VFC

Run Output

VFC

Fault Output

VFC

Energy Saving

VFC

Heat / Cool / Thermo Output

VFC

Pulse Weight

0.1, 1.0 and 10

Notes: VFC: Volt free contact.

= Yes, x = No, - = Not applicable.

6.31

Controls

Advanced Interfaces

6.32

advanced

interfaces

technical specification

interFaCes

maC-397iF

maC-334iF

maC-567iF

AIR CONDITIONINg

ECODAN*

Description

Interface for MA Remote Controller,

Interface for M-NET, MA Remote Controller,

MELCloud Wi-Fi Interface

On/Off Input and Run/Fault Output

On/Off Input, Run/Fault Output and

3rd Party Heating Interlock (M Series)

Connect to

Indoor

Max Number of Units

Compatibility

M Series and

M Series, Mr Slim,

Ecodan FTC6 / FTC5

Mr Slim (SUZ)

City Multi and Lossnay

Power Supply

Dimensions (mm) (WxDxH)

160 x 55 x 70

79 x 18.5 x 44

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit

Filter Sign

Monitor

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit

Filter Sign



Fault Codes



Room Temperature



On/Off but Centrally Controlled

On/Off but NOT Centrally Controlled



Run Output

Fault Output

Energy Saving

Heat / Cool / Thermo Output



Pulse Weight

Notes: VFC: Volt free contact.

= Yes, x = No, - = Not applicable. *For further technical specification on the MAC-567IF for Ecodan please refer to the Heating Section of the Product Catalogue, pages 4.32 - 4.33.

bems

interfaces

technical specification

bems interFaCes

melCobems mini

melCobems

Description

Air to Air Splits Modbus/BACnet Interface.

AE-200E, EW-50E Modbus

Air (Water) to Water Modbus Interface, Lossnay Modbus Interface

BACnet Interface

Connect to

Indoor or Ecodan PCB

AE-200E and EW-50E

Max Number of Units

Compatibility

M Series, Mr Slim, City Multi, Ecodan FTC6/5/4, e-series Chiller,

M Series, Mr Slim

Ecodan QAHV/CAHV/CRHV and Lossnay (LgH-RVX(T)-E1)

and City Multi

Power Supply

24VDC

Dimensions (mm) (WxDxH)

70 x 19 x 50

102 x 32 x 180

Network

Modbus / BACnet RS485^*1

Modbus / BACnet RS485 and TCP/IP

BEMS Compatibility

Cylon, Satchwell, Crestron, Invensys, Interactive Homes,

Cylon, Satchwell, Crestron, Invensys, Interactive

North BT, Andover, Siemens, WEMS, RDM

Homes, North BT, Andover,

Siemens, WEMS, Andover Controls,

York BMS, Siemens, Priva Building Intelligence,

Delta Controls, RDM

Air to Air Splits and Lossnay

Air (Water) to Water

Control

On/Off

Mode

Setpoint

Fan Speed

Air Direction

Permit/Prohibit

Filter Sign

Monitor

On/Off

Mode

Setpoint

Fan Speed

Air Direction

Permit/Prohibit

Filter Sign

Fault Codes

Room Temperature

Daily kW Energy

With EW-50E

Monthly kW Energy

With EW-50E

Key: DI = Digital Input. DO = Digital Output. AI = Analogue Input. AO = Analogue Output.

Notes: *1 Function only available on M Series, Mr Slim and City Multi.

The MELCOBEMS can monitor indoor daily and monthly kWh when used in conjunction with AE-200E, EW-50E, PAC-YG60MCA on third party energy meters.

6.37

Controls

BEMS Interfaces

6.38

bems

interfaces

technical specification

bems interFaCes

iQ4 XnC

melCoJaCe-8000

Description

AE-200E and EW-50E

AE-200E & EW-50E Tridium

Trend Interface^*1

Niagara Interface^*2

Connect to

AE-200E and

AE-200E, EW-50E, Ag-150A,

EW-50E

EB-50g, gB-50

Max Number of Units

50 / 100 / 200

Compatibility

M Series, Mr Slim,

City Multi and Lossnay

Power Supply

220-240v, 50Hz

24v, AC/DC

Dimensions (mm) (WxDxH)

263 x 46 x 150

171 x 61 x 110

Network

Trend

Niagara

BEMS Compatibility

Trend

Any Niagra compatible BMS/BEMS

Control

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Monitor

On/Off



Mode



Setpoint



Fan Speed



Air Direction



Permit/Prohibit



Filter Sign



Fault Codes



Room Temperature



Daily kWh Energy

^*3

Monthly kWh Energy

^*3

Notes: The PAC-YG***CA are not compatible with MELCOBEMS and IQ4 XNC.

*1 Synapsys Solutions Ltd, 1 Woodlands Court, Albert Drive, Burgess Hill, West Sussex, RH15 9TN, Telephone 0845 680 0303

*2 The MELCOJACE-8000 can monitor indoor daily and monthly kWh when used in conjunction with AE-200E, EW-50E, PAC-YG60MCA on third party energy meters.

*2 The MELCOJACE-8000 range is only available from Forest Rock Systems Ltd, Charmwood Building, Holywell Park, Ashby Road, Loughborough, LE11 3AQ. Telephone: 0845 5197958

How to Quote

How to quote an AE-200E System Controller with Energy Monitoring

How to quote Basic

How to quote

Energy Measurement

Energy Apportioning

START

Setup on AE-200E screen kWh pulse

SETUP oNBoARD PI 1-4 oN

QUoTE foR 1-4 x EW-50E

Only EW-50E can be used

weight and onboard PI 1-4 inputs

AE-200E & EW-50E

foR M-NET coNNEcTIoN

for M-NET connection

or PAC-Yg60MCA PI inputs

coNNEcT kWh METER PULSE

Connect 1no kWh meter per AE-200E

QUoTE foR 1 x AE-200E.

All control available

To oNBoARD PI 1-4 oR QUoTE

/ EW-50E onboard PI port or to

QUoTE foR 1 x AE-200E-ENERGY

via AE-200E screen

PAc-YG60McA PI coNTRoLLER

PAC-Yg60MCA PI Ports

PIN coDE

LAN connect all centralised controllers

BASIc ENERGY DISPLAYED

Only total energy displayed

LAN coNNEcT

together with CAT5/6 cable - max 100m

IN AE-200E MEASUREMENT

on AE-200E screen

AE-200E & EW-50E

distance from each AE-200E/EW-50E to

ScREEN foR AE-200E & EW-50E

Hub/Switch

coNNEcT kWh METER PULSE

Connect 1 x kWh meter per AE-200E / EW-50E

END

To oNBoARD PI 1-4 oR QUoTE

onboard PI port or to PAC-Yg60MCA PI Ports

PAc-YG60McA PI coNTRoLLER

ADD 3 DAYS fIELD SERVIcE

Quote for 3 x days field

coMMISSIoNING

service commissioning

Apportioned energy displayed

END

on AE-200E screen and via HTML5

web page (if set up)

6.43

Controls

Screen Examples / How to Quote

6.44

How to Quote

How to quote an AE-200E System Controller & BACnet Option

How to quote up

How to quote

to 200 indoor units

to 2000 indoor units

BAcnet option

START

Quantity of AE-200E

Quote for 1 x BACnet

HoW MANY AE-200E SYSTEM

system control groups

QUoTE 1 x AE-200E-BAcNET

pin code per AE-200E /

QUoTE foR AE-200E

coNTRoL GRoUPS?

from up to 200

PIN coDE PER AE-200E

EW-50E system

control group

indoor selections

Quote for 1-3 x EW-50E

LAN connect all centralised

LAN coNNEcT UP To 10 x

Quote for 1 x day

ARE MoRE THAN 50 INDooR

expansion adapters -

controllers together with

QUoTE 1 DAY fIELD SERVIcE

field service

SYSTEM coNTRoL GRoUPS

CAT5/6 cable - max 100m

UNITS To BE coNNEcTED?

max 200 indoors to create

coMMISSIoNING

commissioning

system control group

ToGETHER

distance from each

AE-200E/EW-50E to

Hub/Switch

Quote for 1 x

ARE INDIVIDUAL WEB USERS_Quote

9 WIRE ADAPTER REQUIRED? PAC-Yg10HA per

REQUIRING AccESS?

AE-200E-WEB USER

END

AE-200E & EW-50E

Pin Code

MAX 200 USERS

Quote for 1 x day

ADD 1 DAY fIELD SERVIcE

END

field service

coMMISSIoNING

commissioning

END